Zhongshan Lingtong Electronic Manufactory
Main products:Smoke Alarm,Remote Control,Home Alarm,Car Alarm,Motorcycle Alarm
Products
Contact Us
  • Contact Person : Mr. Leung Buick
  • Company Name : Zhongshan Lingtong Electronic Manufactory
  • Tel : 86-0760-22245920
  • Fax : 86-0760-22131843
  • Address : Guangdong,Zhong Shan,jidongyi industrial zone,xiaolan town,zhongshan city
  • Country/Region : China
  • Zip : 528400

3 button remote control duplicator

3 button remote control duplicator
Product Detailed
1.remote control 2.duplicator remote 3.315-433 all frequency 4.3 buttons 5.good quality

Key features

Prevents loss and replaces your old remote controlsSelf learning remote controlUsed in car alarms, home alarms, panic buttons, garage doors, rolling curtains and moreCopies most radio frequency fixed code remote controlsLearning face to face in seconds

Applications

Wireless home security systemCar anti-theft alarm systemCar keyless entry systemCar sunroof remote controlVehicle central locking systemWireless call systemHome appliance / industrial automationElectronic garage door / gate openerRemote toy controlRemote fan / lighting controlWireless motor-driven curtainHeating systemsWire elimination project

Step 1. code clear

To clear factory preset codes used for testing purpose, you need to do the following.

Press and hold the top two buttons (lock and unlock label) at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the remote control codes stored is deleted.

 Step 2. code clone

Place the original remote control and copy remote close together (<10mm). Press and hold one button on your original remote and the button on copy remote which you wish to be programmed on at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the button is successfully copied.

Repeat the above clone step for other buttons you wish to copy.

NOTE: The best duplicating position varies depending on the original remote control you are using, you can try different positions until the code is successfully copied.

 Step 3. Code recovery

Press and hold the left two buttons (lock and mute label) at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the original remote control codes have been restored.

The alternate way to code recovery step is clear the codes and relearn them again.

3 button remote control duplicator



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.